Summary:U Bolts - Sizes, Function, and Material Categories...
U Bolts - Sizes, Function, and Material Categories
A U Bolt's nominal bore is its inside diameter. A pipe's nominal bore is the inside diameter, which is based on the gas or fluid capacity of the system. U-bolts clamp round or tubing of any size, and there is a need for a more convenient measurement system. We'll discuss its sizes, function, and material categories in this article. You can find an appropriate U Bolt for your application by using the following tips:
The Size of U Bolt is a nominal specification that describes the size of a bolt or pipe. The nominal size of a U bolt or pipe is indicated by its OD (outside diameter) and its Thread Size (number of threads per inch). Other dimensions include Inside Width and Inside Length. In the case of a U bolt, the Inside Width is the width between the legs, and the Inside Length is the overall length from the middle of the U to the tip of the legs.
What is the Function of U Bolt? A U-bolt is a fastening device for piping, which is typically made from a strong material.
Its main purpose is to guide and hold down objects, but it can also be used as an anchor. U-bolts can be classified into two different types: gripped and non-gripped. Regardless of their type, they all perform the same basic functions.
Although u-bolts are common fasteners, their use has undergone significant technological advancements. This highly engineered component is made of metal and threads. While hot forging u-bolts from cold-finished bars with cut threads is still a popular method, modern materials and cold working techniques can achieve similar strength levels without the need for heat treatment. These changes also have a positive effect on costs.
When looking for a U bolt, you should start with the material categories. The most common types are the hex nuts and the metric bolts. In general, the diameters of these materials are approximately equal to their respective threads. However, if you need a U bolt for a precise application, you should pay close attention to the material categories. There are many factors that determine the material category of a U bolt.
The first step in making your own u-bolt is to determine the strength of the material.
In general, a U-bolt should be able to withstand a high amount of torque. A torque of less than 500 foot-pounds is acceptable, but more than that can be problematic. High-strength steels must be quenched and tempered before they can be used. This process restores the high strength properties of the steel, but it adds additional time and cost to the manufacturing process.
Product: Din3570 U-bolt, JISB 2809
Standard: DIN, GB, ANSI, BSW,JIS B(Japanese Industrial Standards)
Material: carbon steel or specified
Level: 4.8 Level 8.8
Specifications: M3~M45, 3/16"~1-3/4"
Thread: fine teeth, coarse teeth, imperial, American, German
Surface treatment: natural color, galvanized, hot-dip galvanized, blackened, yellow zinc plated
Packing: sacks, paper bags, trays, or upon request