How to properly install the U-bolt

Updated:15-11-2019
Summary:

The U-shaped pipe clamp is treated with galvanizing. Ot […]

The U-shaped pipe clamp is treated with galvanizing. Other external treatment methods can be selected according to requirements. Other materials and pipe diameters can be designed or produced according to requirements.

How to install the u-shaped pipe clamp:

1. U-shaped tube clamp tube card, riding card saddle card, bilateral card double-head code

Application method: Firstly draw the pipe walking road map on the pedestal, plan a reasonable step distance, make a hole, fix the pipe fittings with fixed requirements to the walking pattern, put on the U-shaped pipe clamp, tighten the locking screws at both ends, the device end. The main points of the device are prevented: when drilling holes, the drill pipe with the appropriate diameter should be used first, and the hole hole will affect the fastening effect of the pipe clamp.

2. Expansion bolt type explosion type hanging code hanger, water pipe fixing bracket, water pipe fixing clip

Application method: Firstly, make a hole in the base, put the expansion bolt end of the pipe clamp seat into the hole, fix the pipe clamp seat, tighten the fixing nut, and then place the pipe fittings with fixed requirements, and fix the clamps on the pipe fittings. Tighten the locking screws on both ends and the device is finished. The main points of the device are prevented: when drilling holes, the appropriate hole depth should be firstly drilled with a drill of suitable diameter. Small or shallow holes may affect the fastening of the pipe clamp.

3. Nut type nut type pipe fixing frame, water pipe fixing bracket, water pipe fixing clip

Application method: Firstly, pre-embed the standard bolts on the pedestal, perhaps make holes on the pedestal, use the matching expansion bolts to put into the holes, and then lock them with a wrench to support the nut pairs of the pipe clamps. Screw the thread into the thread, then place the pipe fittings that need to be fixed. Fix the clamps on the pipe fittings, tighten the locking screws on both ends, and finish the installation. Device points to prevent: Check and ensure that the thread is in good condition and the threaded end should retain a certain vacancy when the bolt is tightened. The deformation or shortness of the threaded end will affect the fastening of the pipe clamp.

4. Silk-type bar type hanging code hanger, water pipe fixing bracket, water pipe fixing clip

Application method: Firstly, make a hole in the base, use the matching expansion nut to put it into the hole, screw the threaded end of the pipe clamp into the hole, fasten it, then place the pipe fittings with fixed requirements, and fix the clamps on the pipe fittings. , tighten the locking screws at both ends and the device is finished. Device points to prevent: The built-in expansion nut may show that the sliding cannot be tightened, and then affect the fastening effect of the pipe clamp.

5. Straight straight straight pipe fixing bracket, pipe clamp pipe buckle

Application method: Firstly, make a hole in the base, insert the straight nail head into the hole, then place the pipe fittings with fixed requirements, fix the clamps on the pipe fittings, tighten the locking screws on both ends, and complete the device. The main points of the device are prevented: the pipe code may be affected by factors such as external force and slipped out.

1+
Contact Us